PV cleaning equipment manufacturer
PV cleaning equipment manufacturer
G1 Water-Fed Solar Panel Brush
The G1 is an unpowered water-fed brush for residential rooftops and small solar installations of approximately 100–500 m².
- Aluminum and carbon-fiber pole options
- Telescopic reach up to approximately 11 m
- Hidden water-pipe brush-head design
- Optional 6.0 LPM, 60 psi water pump
Contact Us for Pricing
Interested in this product? Contact us now for detailed pricing and product information.
Product Details
01 · POSITION
Product positioning
- Model: G1
- Manual Solar Panel Cleaning Tool
- Professional photovoltaic O&M equipment
- Configuration matched to the actual project
02 · DATA
Quick parameters
- Brush material
- PBT
- Cleaning method
- Water washing
- Brush-board size
- 32 × 7 cm
- Aluminum pole lengths
- 3.6 m, 5.4 m, 7.2 m, 9 m, 10.8 m
- Carbon-fiber pole lengths
- 3.2 m, 5.2 m, 7.2 m, 9.2 m, 11.2 m
03 · COMPATIBILITY
Purchase compatibility
- Project fit
- Recommended for approximately 100-500 m² arrays suitable for manual water-fed cleaning.
- Power requirement
- The brush is unpowered; only the optional pump requires electricity.
- Reach choice
- Choose aluminum or carbon-fiber poles with catalog reach up to approximately 11 m.
- Water supply
- Use mains pressure where suitable or add the optional 6.0 LPM pump after checking the source.
04 · SUPPLY
Supply scope
- Equipment configuration review
- Voltage, plug and accessory confirmation
- Operating documentation
- Parts and training options
PRODUCT OVERVIEW
Why G1 is built for this job
No powered rotating brush
Designed to improve cleaning coverage and simplify routine operation.
Aluminum-alloy or carbon-fiber poles
Supports safer equipment control and a more consistent field workflow.
Hidden water-pipe brush design
Helps match the equipment to site access, power and labor conditions.
Optional 6.0 LPM pump
Must be confirmed against the actual module geometry and operating requirements.
STRUCTURED PRODUCT DATA
G1 technical specifications
Use these catalog values for initial comparison. Final suitability requires confirmation against the actual array and operating conditions.
- Brush material
- PBT
- Cleaning method
- Water washing
- Brush-board size
- 32 × 7 cm
- Aluminum pole lengths
- 3.6 m, 5.4 m, 7.2 m, 9 m, 10.8 m
- Carbon-fiber pole lengths
- 3.2 m, 5.2 m, 7.2 m, 9.2 m, 11.2 m
- Optional pump flow
- 6.0 LPM
- Optional pump pressure
- 60 psi / 4.1 bar
- Optional accessories
- Scraper, web brush, dust duster, soap dispenser
APPLICATIONS
Where G1 fits
Application fit depends on site geometry, access, soiling, utilities and the cleaning workflow.
Residential rooftops
Simple water-fed cleaning for household and small commercial systems.
Low-power sites
Manual cleaning without a powered rotating brush.
Long-reach work
Multiple pole materials and lengths for different access distances.
MANUFACTURING & QUALITY
Control the product before it reaches the site
Production and quality requirements should be confirmed against the final model configuration and purchase specification.
Integrated manufacturing workflow
Structural components, electrical control, motor systems and final assembly are coordinated around the product design.
Parts inspectionAssemblyFunctional test
Configuration and quality review
Model, voltage, plug, accessories, operating environment and delivery documentation are checked before confirmation.
Specification reviewOperation checkDelivery record
WHY WATERSPRAYELEPHANT
More than a machine specification
Integrated product engineering
Mechanical, electrical and control development are coordinated for photovoltaic cleaning equipment.
PV-specific brush development
Brush material, contact behavior and wet or dry operation are engineered around solar-module cleaning.
Design-to-production coordination
Product design, component selection, assembly and functional checks follow one connected workflow.
Full-scenario technology base
Manual, powered, remote-controlled and autonomous platforms support different project scales.
DOCUMENTATION & VALIDATION
Build confidence before ordering
Product-specific certificates and named project outcomes should only be published after document and permission review.
Document package to confirm
- Model datasheet
- Final configuration record
- Packing list
- Operation and maintenance instructions
Project validation before purchase
- Compatibility review
- Sample or test plan where applicable
- Acceptance checklist
- Authorized case references when available
Content reviewer: WaterSprayElephant Product Engineering Team ·
PRODUCT FAQ
Frequently asked questions about G1
Does G1 require electricity?
The brush itself is unpowered. An optional water pump requires power when mains water pressure is unavailable.
Which pole material should I choose?
Carbon fiber reduces pole weight, while aluminum alloy offers a different cost and handling profile. Required reach and operator workload should guide the choice.
How long can the pole be?
Catalog options extend to about 10.8 m in aluminum alloy and 11.2 m in carbon fiber.
Can other tools fit the pole?
Optional scraper, spider-web brush and dusting accessories are listed for compatible configurations.
Related Products
G4 Roller Brush Solar Panel Cleaning Machine
The G4 is a portable roller-brush cleaning machine designed for efficient wet or dry cleaning on 500–6,000 m² photovoltaic projects.60…
G2 Single-Head Solar Panel Cleaner
The G2 is a compact powered brush for precise water cleaning and removal of stubborn localized dirt on small photovoltaic…
G2U Ultra Single-Head Solar Panel Cleaner
The G2U is a powered single-head water-cleaning machine for stubborn localized soiling on approximately 100–500 m² solar projects.45 cm large-disc…
G3U Ultra Double-Head Solar Panel Cleaner
The G3U is a wide double-head water-cleaning machine for commercial rooftops and distributed PV projects from 500 to 6,000 m².Up…